5 tips for a quick installation of a DucoBox

An efficient and smooth installation of mechanical ventilation not only saves time and money, but also ensures an optimally functioning system without noise pollution. With the right tools and methods, you can ensure a quality installation that meets all technical requirements. Here are five essential tips to make the installation of a DucoBox ventilation system faster, easier and quieter.

1. Take advantage of the AUTO-calibration

Thanks to automatic calibration at constant pressure, you save up to 50% on calibration time. This means not only a faster installation, but also an average saving of £25 per project. The valves only need to be set once, after which the system automatically optimises the airflow.

The handy copy function allows you to easily transfer settings to other DUCO systems, saving even more time and money. Correct calibration is also crucial for preventing noise pollution: not too little ventilation for a healthy indoor climate, but also not too much to avoid noise problems.

Tip for noise reduction: Choose a demand-controlled or zonal ventilation system that only ventilates where and when necessary. Zonal ventilation, where different rooms are ventilated independently based on sensors detecting CO2, moisture or movement, not only saves energy but also ensures quieter operation as the system never works harder than necessary.

2. Left/Right interchangeability without extra work

With the patented dual bypass principle, you can easily switch between left and right configurations via the display mode. This is done entirely through software, keeping the installation flexible and easily adaptable to any type of home without additional mechanical adjustments. This flexibility helps you minimise bends in the duct system, which directly contributes to quieter operation.

3. Use the Duco Installation App

The Duco Installation App makes installation and calibration simpler, more efficient and more accurate. With the app, you can:

• Quickly adjust ventilation settings via an intuitive installation wizard
  
• Save and reuse project data with the CopyFlow function
  
  
• Read and adjust parameters
  
  
• Analyse and report faults and error messages
  
  
• …

By using this digital tool, you avoid errors and save valuable installation time. Moreover, proper calibration via the app ensures an optimal balance between ventilation performance and noise production.

For minimal noise pollution: Ensure all ducts are airtight to prevent leaks. The app helps you detect potential problems in the installation that could lead to increased noise levels.

4. Choose the correct duct diameter and type

A correct dimensioning of air ducts is essential to prevent pressure loss and noise pollution. Ducts that are too small lead to increased air resistance, forcing the unit to work harder and produce more noise.

Consider the following guidelines:

For MEV systems:

• Ø 125 mm from 30 m³/h
• Ø 100 mm for smaller airflows (< 30 m³/h)
• Ø 160 mm to the roof outlet

For MVHR systems:

• Ø 160 mm up to 250 m³/h
• Ø 180 mm for higher airflows (> 250 m³/h)

For optimal acoustics: Avoid flexible ducts where possible, as they cause air resistance, turbulence and additional noise. Opt for rigid ducts with a smooth interior for efficient and quiet operation. Use a low-resistance roof outlet to minimise back pressure and associated noise.

5. Minimise bends and use acoustic silencers

Install air ducts as straight as possible and limit the number of bends. Sharp angles reduce airflow, increase resistance and create additional noise. Pay particular attention to bends close to the ventilation unit, as these have the greatest impact on noise production.

Acoustic optimisation: Where necessary, place silencers at the noisiest points of the installation:

MEV system: 0.5m to 1m acoustic silencer per connection leading to other rooms.
MVHR system: 1m acoustic silencer per duct leading to the dwelling.

By strategically placing these silencers, you significantly reduce the noise level and increase living comfort. When bends are unavoidable, ensure they are never sharper than 90°.

DUCO tools for a perfect installation

To help you achieve a quick and quiet installation, DUCO offers various tools:

1. Material requirements and layout plan: Let DUCO create a detailed overview of all required materials and an optimal layout plan for your project.
   
   
2. Installation tips cheatsheet: Each DucoBox comes with a handy overview of the most important installation tips, including a QR code to online resources.
   
   
3. Technical instruction videos: On duco.tv, you'll find step-by-step installation and service videos.
   
   
4. DUCO Academy training: Become a DUCO VIP installer by participating in free training sessions on installation, calibration and troubleshooting.
   
   
5. Start-Up Service: Have a DUCO technician come on-site to calibrate the installation, with an optional ventilation performance report for the building regulations documentation.
   
   
6. Tailored technical advice: DUCO's technical advisers are ready to help you with specific questions or challenges.

Maintenance for lasting silent operation

A well-installed ventilation system can still cause noise pollution over time due to the accumulation of dust and dirt. This affects not only air quality but also acoustic comfort. Regular maintenance according to DUCO maintenance instructions ensures that you continue to enjoy a healthy indoor climate without noise pollution.

With these tips and tools, you ensure a fast, efficient and quieter installation of a DUCO ventilation system. Take advantage of the smart technologies and use the practical installation tools to complete your work faster, with higher quality and less noise.

Discover all DUCO tools and aids for a quick and flawless installation and worry-free follow-up of your project. From A to Z.